Application
■ Paper-making, fiberboard-making industry
■ Sugar-making and starch industry
■ Industrial sewage treatment
Performance Range
Flow: up to 2,000m3/h (8,800 gpm)
Head: up to 80m (262 ft)
Working Pressure: up to 1.0MPa
Working Temperature: up to 100℃
Performance Features
ES series pump is specially designed to pump pulp and slurry. Its main features are as follows:
High efficiency, low energy consumption
Sharp dipping QH curve, easy to control
The pump lift or working efficiency of the pump has little decrease when the solid medium content is high.
The medium with gas has a little affection on pump.
Good NPSH value
Structural Features
The blades of specially-designed open impeller extend toward the inlet. Medium solid content can be up to 10%, gas content up to 6%.
A changeable wear-resisting plate is adopted to avoid the friction of pump body.
It is unnecessary to dismantle the pipelines when dismantle and install the pumps.
There is no dead water area between the pump bodies and covers.
The bearing adopts grease for lubrication, and its service life is more than 20,000 hours.
The seal type depends on the working conditions.
Special Structure (suitable for conveying the media with gas.)
The special structure pump is recommended to convey the pure liquid or solid-liquid mixed Medias with the gas content up to 6%.
■ The medium flow can’t be cut out even the gas content is high.
■ Flow balance
Materials
According to the carried media and use conditions, the pump adopts the following standard materials:
Cast iron, carbon steel, Ni-Cr-Mo stainless steel and other special materials
.jpg)
_0rfh.jpg)
鲁公网安备 37100202000763号