CREATED  IN CHINA​
Product
Article
Search
DB33/DMX (BB3) Horizontal Split Multistage Pump

DB33/DMX (BB3) Horizontal Split Multistage Pump

API610 BB3 Pump
0.00
0.00
  
API610 BB3 Pump
Product Overview
DB33/DMX series horizontal multistage split casing pump are applied in transfering boiler water, seawater, petroleum products, petrochemical process and other chemical products.

Performance Range
Flow: 10~2400 m3/h  (10,570gpm)
Head: up to 2,000m  (6,560ft)
Design Pressure (P): 10.0~35.0MPa
Working Temperature: -40~+200℃

Structural Features
DMX pump is a horizontal multistage split casing pump with completely symmetrical arrangement and reliable hydraulic performance, able to economically and reliably work without fault.

The inter-stages adopt ring-shaped flexible seal and the inter-casings adopt thin pad to prevent from leakage caused by high pressure and temperature.

When the temperature variation of the pump casing, inlet and outlet, the horizontal split casing can minimize the nonaffine deformation, which has a minimum effect on the precision.

The inlet and outlet are designed on the bottom casing and the inner pump rotor can be disassembled or assembled without moving the inlet and outlet pipes.

Impeller back to back arrangement

Double volute hydraulic passages

First stage impeller with low NPSHr

Seal chamber accommodates packing and multiple mechanical seal types.

Renewable casing and impeller wear rings

Dynamic balancing and TIR verifications on assembled rotors

Jack screws (motor side) for an easier alignment setting

Roller bearing and ball thrust with oil flinger lubrication system,Sleeve radial and tilting pad thrust bearings with pressure lubrication system
CREATED  IN CHINA