CREATED  IN CHINA
SPP Horizontal Mixed-flow Pump

SPP Horizontal Mixed-flow Pump

0.00
0.00
  
Product Overview

Structural Features
High efficiency and low energy consumption
Uniform energy consumption within the performance range; able to start when the valve is closed and the electric motor will not overload.
Large overflowing section, difficult to blockage
Firm structure, long service life

Horizontal Structure
For the “draw-out” pump, the pipeline connected with the pump need not to be dismantled when checking and dismount the impellers and shaft seals. The pump is equipped with precisely processed pump shafts and bearings lubricated by thin oil. The packing gland also has protective shaft housing and the oil level in the bearing housing can be controlled by “constant level” oiler.
The pump is casted with supporting feet to bear any load from the pipeline and directly transfer the load to the foundation. In doing so, the rotors will not be deformed by the load and thus the optimal service life of the bearing can be ensured.
The pumps with the dimensions of 35-40 comply with NEN5802/DIN2532 standards in the size of inlet and outlet flanges; the pressure rating is 1.0MPa. The pressure rating of the pumps with larger specifications is 0.6MPa.
The rotation direction of the pump: clockwise looking from the driving end.
The dive power is supplied by electric motor or internal combustion engine
The pump can be equipped with complete discharge device for the convenient discharge of the suction line.

Seal Type
Packing seal or double-end mechanical seal

Performance Range
Flow : up to 7,000m3/h
Head : up to 25m
Working Pressure : up to 0.6MPa
Operating Temperature : -20~+120℃

Applications
  Forced circulation in chemical process
Urban gas engineering
  Sea farming
Water treatment system
In a word, this pump can economically and effectively transport well-proportioned or granular neutral or corrosive liquids with large flow rate and low lift.

 

CREATED  IN CHINA